Oils and Lubricants

Shop by price
    118 Products found for Oils and Lubricants
    • https://shop.jeppesen.com/images///products/11091225-173x173.jpg
      Fluid: Hyd,Lubricant,Qt, Mil-Prf-5606H

      MIL-PRF-5606H Hydraulic Fluid. Red, mineral base.X/C 5606H Aviation Hydraulic Fluid is a red-dyed, mineral-based fluid formulated to provide protection under severe-duty applications.

    • https://shop.jeppesen.com/images///products/11091239-173x173.jpg
      Aeroshell Grease 33 Synthetic Universal Airframe Lubricant, 14 Oz

      Aeroshell 33 universal airframe grease is specially designed for use in Boeing aircraft. Effective on virtually all airframe components, applications include airframe equipment, actuator screws and roller bearings among other parts.


    • https://shop.jeppesen.com/images///products/11091252-173x173.jpg
      Grease: Low Temp,Bearing,150Gm, Dow Corning 33,Lt

      Dow Corning Molykote 33 Bearing Grease is used to lubricate ball bearings operating under light to moderate loads, such as casters, clock motors, windshield wiper motors, starter clutch drives, etc. 

    • https://shop.jeppesen.com/images///products/11091257-173x173.jpg
      Oil: Lube,Instrument,Qt, Brayco 885
      Castrol Brayco 885 is a diester base synthetic oil with additives which impart corrosion protection, minimize galvanic corrosion, inhibit oxidation, and reduce foaming tendencies.
    • https://shop.jeppesen.com/images///products/11091296-173x173.jpg
      Grease,Synthetic,Ctg, Royco,Mil-Prf-81322

      ROYCO® 22CF is a brown synthetic oil-based grease that provides outstanding performance at extreme temperatures, as low as 65℉ and up to 400℉.

    • https://shop.jeppesen.com/images///products/11091297-173x173.jpg
      Lubricant: Oil,Qt, Mil-Prf 7870

      ROYCO 363 is a highly refined mineral oil based lubricant formulated with modern additives to provide oxidation and corrosion protection, low temperature fluidity, rust inhibition, and good resistance to evaporation. 

    • https://shop.jeppesen.com/images///products/11091323-173x173.jpg
      Eastman™ Turbo Oil 2197, 1 Qt

      Eastman Turbo Oil 2197 is designed to exceed the demand of current and future turbine engines. With over 400 million hours of in-flight experience, it is by far the most widely used HTS fleet oil in the world.

    • Oil: Lube,General Purpose,Qt, Brayco 300
    • https://shop.jeppesen.com/images///products/11091326-173x173.jpg
      Royco® 44 Black Anti-Seize Compound, 1.75 Lb

      Royco 44 is a heavy-duty anti-seize compound developed formulated to delicately blance electrical conductivity needs with corrosion resistant metal/metal allow contact suitability. Royco 44 has a consistency similar to modeling clay and is black in color.

      Royco 44 is recommended for use as anti-seize compound for threaded fasteners and fittings as well as spark plugs, igniters and similar threaded aircraft engine accessory equipment. Due to the graphite compound in Royco 44, this material should not be used in contact with aluminum, magnesium, cadmium or zinc alloys and platings without prior evaluation. Because Royco 44 conducts electricity readily, the mating of dissimilar alloys, which may create an electrical potential, should be avoided.


      Meets SAE-AMS-2518, formerly MIL-T-5544C

    • https://shop.jeppesen.com/images///products/11091350-173x173.jpg
      Phillips 66 1045479 X/C 25W-60 Piston Engine Oil, 2.5 gal, 2/cs
      X/C Aviation Oil 25W-60 is an ashless dispersant, multigrade engine oil specially formulated for year-round use in aircraft piston engines.
    • https://shop.jeppesen.com/images///products/11091351-173x173.jpg
    • https://shop.jeppesen.com/images///products/11091352-173x173.jpg
      Castrol Brayco Micronic 881 Red Low-Temperature Fire-Resistant Hydraulic Fluid, 5 Gal

      Brayco Micronic 881 is a synthetic hydrocarbon base fluid designed for low-temperature applications in which low-temperature stability is important.

    • https://shop.jeppesen.com/images///products/11091371-173x173.jpg
      Royco® 43 Lithium Grease, 6.5 Lb

      Royco 43 is a lithium-based grease system used for specific heterogenous materials applications.


      NATO: G-392

    • https://shop.jeppesen.com/images///products/11091380-173x173.jpg
      Mobilgrease 33 High-Performance Aircraft Lubricant, 13.4 Oz Tube

      Mobilgrease33 is a high-performance lithium-complex grease designed for multi-purpose airframe use. Meets the specifications of Airbus AIMS09-06-002; Boeing BMS 3-33B Type 1; MIL-PRF-23827C, Amendment 2, Type I; NATO G-354; and SAE AMS3052.

      • High viscosity index polyalphaolefin basestock
      • Good storage stability
      • Exceptional resistance to thermal and oxidative degradation
      • Very wide operating temperature range with outstanding high and low temperature performance and excellent lubricant film protection at high temperatures
      • Grease structure integrity maintained - low oil separation
      • Long grease and lubricated part service life


      Mobilgrease 33 is a true multipurpose aviation grease intended for use in highly loaded anti-friction bearings, gears, and actuators as well as instruments, high speed bearings (though not recommended for wh

    • https://shop.jeppesen.com/images///products/11091407-173x173.jpg
      Royco® 586M Lubricating Oil, 5 Gal

      A blend of highly refined mineral oils and additives that achieve excellent load carrying capacity and corrosion/oxidation inhibition. A higher viscosity and load carrying capacity than Royco 586L Lubricating Oil. Designed for application in gear boxes and specified helicopter transmissions.


      MIL - PRF - 6086 GRADE M
      NATO: MIL - PRF - 6086 GRADE M


      Joint Service Designation: OEP-70

    • https://shop.jeppesen.com/images///products/11091417-173x173.jpg
      Mobilgrease 28 Synthetic Aircraft Grease Red, 35.2 Lb Pail

      Designed for plain and rolling bearings, splines, screws, worm gears and other mechanisms where high-friction reduction, low-wear and low-lubricant friction losses are required. Meets the specifications of MIL-PRF-81322G; DOD-G-24508A, Amendment 4; and NATO G-395.

      • High viscosity index (VI) synthetic base stock with no wax content
      • Excellent protection against wear and corrosion
      • Extreme-pressure protection characteristics
      • Allows wide operating temperature range - outstanding high and low temperature performance
      • Provides thicker fluid films protecting against wear of equipment parts operating at high temperature
      • Superb bearing protection and helps extend bearing life and reduce bearing replacement costs


      Mobilgrease 28 is designed for the lubrication of plain and rolling bearings at low to high speeds, and splines, screws, worm

    • https://shop.jeppesen.com/images///products/11091422-173x173.jpg
      Brayco 599 Dark Amber Preservation Oil, 8 Oz

      Brayco 599 is designed for use as an additive for turbine engines and helicopter transmissions that use MIL-PRF-23699F lubricating oil. Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be placed in storage, especially in locations where high humidity and salt spray are present. The corrosion inhibited oil should be capable of limited use not to exeed 25 hours. Please consult the engine manufacturer's manual to determine specific engine model recommendations and/or limitations.


      To receive full protection for extended equipment storage, Castrol recommends addition of Brayco 599 in concentrations between 10% and 15% by volume. Lower concentrations between 5% and 10% may be suitable for some component storage applications depending upon storage conditions and length of storage. Please consult the engine manufacturer's maintenance manual or service bulletin t

    • https://shop.jeppesen.com/images///products/11091425-173x173.jpg
      Lubricant: Solid,Push Tube,1.6Oz, Boelube
      High Efficiency Lubrication High lubricity and unique polar properties are the keys to its ability to provide superior metalworking lubrication. The application of minute amounts of BOELUBE, which is consumed in the metalworking process, will greatly improve tool life, surface finish and hole quality. BOELUBE provides superior lubricity when machining materials such as aluminum and titanium where high quality finish and an increase in tool life is observed. Cost savings are derived through longer tool life, increased productivity, reduced lubricant usage, lower shop maintenance costs, and clean chips, parts and machinery. Advantages BOELUBE will not promote dermatitis and presents a safe effective method for operators to machine various types of metal, composites, graphite, etc. without special handling or typical disposal problems. BOELUBE is easily removed with water-based cleaner, isopropyl alcohol or denatured alcohol. In most cases
    • https://shop.jeppesen.com/images///products/11091464-173x173.jpg
      Lanxess Solutions Oil: Turbine Engine,Qt, Royco 808,Mil-Prf7808H

      ROYCO 808 is a synthetic based lubricating oil for gas turbine engines requiring an oil with lower volatility and higher oxidative stability than is obtainable with conventional mineral based turbine oils. ROYCO 808 is formulated using the highest quality polyol ester base stocks compounded with additives to impart higher oxidation and corrosion resistance as well is enhanced antiwear protection. These benefits provide for exceptionally clean engine operation as well as extended drain intervals.

      ROYCO 808 meets all requirements and is qualified under MIL-SPEC: MIL-PRF-7808L Grade 3.

      Royco 808 is not interchangeable with any other lubricating oils except those qualified under MIL-PRF-7808 or MIL-L-23699.

    • https://shop.jeppesen.com/images///products/11091491-173x173.jpg
      Aeroshell Oil 80, 1 Qt

      AeroShell Oil 80 is a straight mineral oil blended from selected high viscosity index base oils. This oil does not contain any additives except for very small amounts of pour point depressant to improve fluidity at very low temperatures and an anti-oxidant. AeroShell Oil 80 is designed to provide effective protection to engine components compared to conventional mineral oils and helps ensure reliable performance between scheduled overhauls.


      • High viscosity index
      • Provides compatibility with other approved aircraft piston engine oils
      • Inherently stable in storage when stored and handled correctly


      Specifications and Approvals:
      SAE specification J-1966 (Grades SAE 30, 40, 50 and 60 respectively
      Military qualification approval, listed on the Qualified Products List (QPL) issued by the US Navy
      Listed on the Technically Acceptable Products List (TA