Aircraft Supplies

Shop by price
    363 Products found for Aircraft Supplies
      Polish: 8Oz, Novus #1,24Cs
      Novus #1 gently cleans without scratching. #2 removes fine scratches, and #3 removes heavier scratches.
      Fluid: Hyd,Lubricant,Qt, Mil-Prf-5606H

      MIL-PRF-5606H Hydraulic Fluid. Red, mineral base.X/C 5606H Aviation Hydraulic Fluid is a red-dyed, mineral-based fluid formulated to provide protection under severe-duty applications.

      Dow Corning® Xiameter® Sealant Clear, 300 Ml Cartridge

      Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is clear in color and has a specific gravity of 1.04. This acetic acid odored, paste sealant comes in a 300-milliliter cartridge. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.


      • Exhibits excellent dielectric properties
      • Acetoxy cure system
      • Easy to apply non-sag, paste consistency


      • Excellent adhesion to many substrates
      • Cures at room temperature when exposed to moisture for a tough, flexible rubber


      • General industrial sealing and bonding applications
      • Sealing flashing, vents, flues, gutters, marine cabins and windows
      • Electrical boxes
      • Caulking joints in sheet metal stacks
      • Duc
      Aeroshell Grease 33 Synthetic Universal Airframe Lubricant, 14 Oz

      Aeroshell 33 universal airframe grease is specially designed for use in Boeing aircraft. Effective on virtually all airframe components, applications include airframe equipment, actuator screws and roller bearings among other parts.


      Grease: Low Temp,Bearing,150Gm, Dow Corning 33,Lt

      Dow Corning Molykote 33 Bearing Grease is used to lubricate ball bearings operating under light to moderate loads, such as casters, clock motors, windshield wiper motors, starter clutch drives, etc. 

      Celeste® Jet Scent Spray Clean & Pure, 6 Oz
      Jet Scent Spray - Clean & Pure - 6 oz. bottles - Case: 12 bottles.
      Oil: Lube,Instrument,Qt, Brayco 885
      Castrol Brayco 885 is a diester base synthetic oil with additives which impart corrosion protection, minimize galvanic corrosion, inhibit oxidation, and reduce foaming tendencies.
      Sealant: 654 Semkit,6Oz,Dms Spec,

      PR-1422 Class B is an aircraft integral fuel tank sealant. It has a service range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing fuel tanks and other aircraft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.


      PR-1422 Class B is a two-part, dichromate cured poly-sulfide compound. The uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form resilient sealant having excellent adhesion to common aircraft substrates.



      • AIMS 04-05-001 - H – AIRBUS
      • AIMS 04-05-002 - H – AIRBUS
      • AMS-S-8802 - Type 1 Class B-1/2
      • CMS-SL-1
      Grease,Synthetic,Ctg, Royco,Mil-Prf-81322

      ROYCO® 22CF is a brown synthetic oil-based grease that provides outstanding performance at extreme temperatures, as low as 65℉ and up to 400℉.

      Lubricant: Oil,Qt, Mil-Prf 7870

      ROYCO 363 is a highly refined mineral oil based lubricant formulated with modern additives to provide oxidation and corrosion protection, low temperature fluidity, rust inhibition, and good resistance to evaporation. 

      Henkel Loctite® 271 Threadlocker Sealant 27121 Red, 10 Ml Bottle

      Henkel Loctite 271 Series anaerobic threadlocker sealant is suitable for permanent locking and sealing of threaded fasteners. This dimethacrylate ester-based sealant has a vapor pressure less than 5 millimeters Hg at 26.7 degrees C, specific gravity of 1.1 at 25 degrees C, VOC contents of 7.81 grams per liter and a boiling temperature rating greater than 148.9 degrees C. It has a flash point greater than 93.3 degrees C TCC for safe use. The mild odored, liquid sealant is red in color and comes in a 10-milliliter bottle. It has a tensile strength of 250 psi. This product requires 24 hours for curing at 25 degrees C, 10 minutes for drying and 10 minutes for setting. It withstands a temperature range of -65 to 300 degrees F.


      • Avoids loosening from shock and vibration
      • Viscosity of 500 centipoises at 25 degrees C
      • Torque rating of 250 pounds-inch break and 275 pounds-inch prevail
      3M™ Scotch-Weld™ EC-1300L Rubber and Gasket Adhesive Yellow, 1 qt can
      3M™ Scotch-Weld™ EC-1300L rubber and gasket adhesive is yellow in color and dries quickly within 10 to 20 minutes of open time. This adhesive uses sprayer, brush or roller as the applicator to meet the specific demands of the job. It offers heat resistance up to 300 degrees F. The sweet odored, liquid adhesive has a boiling point of 60 degrees C, flash point of -25.6 degrees C and a viscosity of +/- 675 megapascals. It has less than or equal to 662 grams per milliliter VOC contents that ensure fast evaporation. This polychloroprene-based adhesive comes in a 1-quart can.
      Eastman™ Turbo Oil 2197, 1 Qt

      Eastman Turbo Oil 2197 is designed to exceed the demand of current and future turbine engines. With over 400 million hours of in-flight experience, it is by far the most widely used HTS fleet oil in the world.

    • Oil: Lube,General Purpose,Qt, Brayco 300
      Royco® 44 Black Anti-Seize Compound, 1.75 Lb

      Royco 44 is a heavy-duty anti-seize compound developed formulated to delicately blance electrical conductivity needs with corrosion resistant metal/metal allow contact suitability. Royco 44 has a consistency similar to modeling clay and is black in color.

      Royco 44 is recommended for use as anti-seize compound for threaded fasteners and fittings as well as spark plugs, igniters and similar threaded aircraft engine accessory equipment. Due to the graphite compound in Royco 44, this material should not be used in contact with aluminum, magnesium, cadmium or zinc alloys and platings without prior evaluation. Because Royco 44 conducts electricity readily, the mating of dissimilar alloys, which may create an electrical potential, should be avoided.


      Meets SAE-AMS-2518, formerly MIL-T-5544C

      Adhesive: Epoxy,A/B,50Ml, Araldite 2014Ab,Dual Barrel Ct
      Dow Corning® Xiameter® Sealant Red, 300 Ml Cartridge

      Dow Corning® Xiameter® RTV736 Series heat-resistant silicone sealant is red in color and has a specific gravity of 1.04. An acetic acid odored, paste sealant comes in a 300-milliliter cartridge. It has a tensile strength of 348.1 psi and requires 24 hours for curing. This product withstands a temperature of -65 to 260 degrees C.


      • Ensures stability at high temperatures
      • Non-sag or non-flowing
      • Relative density of 1.04


      • Can be applied overhead or on side walls
      • Used in applications with continuous exposure to 260 degrees C and intermittent exposure to 315 degrees C


      • Sealing and encapsulating heating elements in appliances
      • Aerospace gasketing
      • Moving oven belts, industrial ovens
      • Bag filters on smoke stacks
      • Other critical bonding, sealing
      Phillips 66 1045479 X/C 25W-60 Piston Engine Oil, 2.5 gal, 2/cs
      X/C Aviation Oil 25W-60 is an ashless dispersant, multigrade engine oil specially formulated for year-round use in aircraft piston engines.
      Castrol Brayco Micronic 881 Red Low-Temperature Fire-Resistant Hydraulic Fluid, 5 Gal

      Brayco Micronic 881 is a synthetic hydrocarbon base fluid designed for low-temperature applications in which low-temperature stability is important.