Aircraft Supplies

    369 Products found for Aircraft Supplies
    • https://shop.jeppesen.com/images///products/11091719-173x173.jpg
      Dow Corning® 4 Electric Insulating Compound, 5.3 Oz (150 G) Tube
      11091719

      DC 4 is a grease-like material containing an inert silica filler in combination with selected plydimethyl silicone fluids.

       

      Features and Benefits:

      • High dielectric strength
      • Low volatility
      • Moisture resistant
      • Good thermal oxidation and chemical stability
      • Meets requirements of SAE AS 8660
      • Certification to NSF 51 and 61
      • Retains its grease like consistency from -40℃ (-40℉) to +200℃ (392℉)
      • Odorless
      • Highly water repellent
      • Adheres readily to dry metals, ceramics, rubber, plastics and insulating resins

       

      Applications:
      A moisture proof seal for aircraft, automotive and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals.

       

      To Use:
      Can be applied by

      $14.47
    • https://shop.jeppesen.com/images///products/11091724-173x173.jpg
      Celeste® Sani-Com Pre-Moistened Multi-Purpose Cleaning Towel, 200 Per Box
      11091724
      Sani-Com - Cleaner for Headsets, communication equipment and cleansing hands - Case: 200/box, 6 boxes/cs.
      $11.61
    • https://shop.jeppesen.com/images///products/11091739-173x173.jpg
      Dow Corning® Sealant Clear, 90 Ml
      11091739

      Dow Corning® RTV3145 Series silicone sealant has a specific gravity of 1.1. This slight odored, paste sealant is clear in color and comes in a 90-milliliter container. The silicone base sealant has a tensile strength of 864 psi. It withstands a temperature of -45 to 200 degrees C.


      Features:

      • Requires no mixing and no ovens
      • Ensures quick in-line processing with optional heat acceleration
      • Can be considered for use with military specification and standard requirements
      • Relative density of 1.12

      Benefits:

      • Cures at room temperature
      • Non-flowing sealant offers high tensile/tear strength and elongation

      Applications:

      • Sealing openings in modules and housings
      • Assembly of components on printed wiring board (PWB)
      • Sealing in and around wired and electrical leads

      Specifi

      $34.30
    • https://shop.jeppesen.com/images///products/11091746-173x173.jpg
      Phillips 66 1045575 Type M 20W-50 Aviation Oil, 1 qt
      11091746
      Phillips 66 Type M 20W-50 is generally recommended and used as a break-in oil for newly overhauled aircraft engines and is often used by engine overhaul and repair shops for the initial run-in of aircraft piston engines. Type M 20W-50 is designed for owners and pilots who want the performance of multi-viscosity, mineral-based piston engine aviation oil without dispersant additives. Type M Aviation Oil meets the requirements of: SAE Standard J1966 U.S. Military Specification MIL-L-6082 (obsolete) QPL approval number: N06L1-20W-50 (Type M)
      $4.81
    • https://shop.jeppesen.com/images///products/11091748-173x173.jpg
      Dow Corning® Xiameter® Sealant Clear, 90 Ml Tube
      11091748

      Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is clear in color and has a specific gravity of 1.04. This acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.

       

       

       


      Features:

      • Exhibits excellent dielectric properties
      • Acetoxy cure system
      • Easy to apply non-sag, paste consistency

      Benefits:

      • Excellent adhesion to many substrates
      • Cures at room temperature when exposed to moisture for a tough, flexible rubber

      Applications:

      • General industrial sealing and bonding applications
      • Sealing flashing, vents, flues, gutters, marine cabins and windows
      • Electrical boxes
      • Ca
      $3.74
    • https://shop.jeppesen.com/images///products/11091752-173x173.jpg
      Flamemaster Chemseal Cs 3204 Aircraft Integral Fuel Tank Sealant Pint Kit
      11091752

      CS 3204 is fuel resistant sealant for use on integral fuel tanks and pressurized cabins as well as other ares subject to contact with aircraft fuels, lubricants, oils, water and/or weathering.

       

      CS 3204 is a two-part polysulfide base compound that cures at room temperature to a flexible, resilient rubber with excellent adhesion to aluminum, magnesium, titanium, steel and various other materials. It is designed to withstand the attack of sulfur compounds that are present in jet fuels. When mixed CS 3204 Class A is self-leveling liquid. CS 3204 Class B is a thixotropic paste that will not flow or sag on vertical or overhead surfaces.

       

      Specifications:

      Class A contains toluene within the limits called out by AMS-S-8802

      $27.01
    • https://shop.jeppesen.com/images///products/11091754-173x173.jpg
      Phillips 66 1045457 X/C 20W-50 Aviation Oil, 1 qt
      11091754
      X/C 20W-50 is the first approved multiviscosity aviation oil for opposed piston engines. It provides better engine performance than any single-grade oil in all weather conditions. X/C 20W-50 is formulated with an ashless dispersant package allowing for cleaner engine operation. X/C 20W-50 is recommended for break-in. It provides a cleaner and quicker break-in than traditional all mineral single grade oils. Plus, X/C is an operational oil so there is no need to switch oils after break-in. X/C 20W-50 utilizes all petroleum base oils which provide excellent solvency and is successful in preventing lead and lead salts.
      $19.09
    • https://shop.jeppesen.com/images///products/11091756-173x173.jpg
      Flamemaster Sealant: A/B,6Oz Ct,Gry,
      11091756
      Integral Fuel Tank Sealant - Meets AMS-S-8802, Type II, Class B 1/2 Sealant. Designed to withstand the attck of sulfur compounds present in jet fuels. Also used as a pressurized cabin sealant. Alternates with PR-1440, PS1440, PS-890, and MC-236.Type II, Class A 1/2 Sealant.
      $14.54
    • https://shop.jeppesen.com/images///products/11091760-173x173.jpg
      Aeroshell Piston Engine Oil 100, 1 Qt
      11091760

      AeroShell Oil 100 is a straight mineral oil blended from selected high viscosity index base oils. This oil does not contain any additives except for very small amounts of pour point depressant to improve fluidity at very low temperatures and an anti-oxidant. AeroShell Oil 100 is designed to provide effective protection to engine components compared to conventional mineral oils and helps ensure reliable performance between scheduled overhauls.

       

      Benefits:

      • High viscosity index
      • Provides compatibility with other approved aircraft piston engine oils
      • Inherently stable in storage when stored and handled correctly

       

      Specifications and Approvals:
      SAE specification J-1966 (Grades SAE 30, 40, 50 and 60 respectively)
      Military qualification approval, listed on the Qualified Products List (QPL) issued by the US Navy
      Listed on the Technically Acceptab

      $6.86
    • https://shop.jeppesen.com/images///products/11091764-173x173.jpg
      Aeroshell Grease 22, 13.4 Oz
      11091764

      AeroShell Grease 22 is a versatile, multipurpose grease designed to extend the lives of bearings operating under high loads and speeds and wide temperature ranges. It uses a Microgel® thickener and high-viscosity-index synthetic base oils to protect components in severe operating conditions. Its excellent load-carrying capacity and resistance to wear, corrosion, oximdation and water washout make it a good choice for wheel bearings and other critical components.

       

      Benefits:

      • Longer life for components
      • Longer grease life
      • Reduced costs
      • Versatile applications

       

      Applications:

      • Aircraft wheel bearings
      • Engine accessories
      • Control systems
      • Actuators
      • Screw jacks
      • Servomechanisms
      • Electric motors
      • Helicopter rot
      $13.75
    • https://shop.jeppesen.com/images///products/11091768-173x173.jpg
      Royco® 756 Red Mil-Prf-5606H Petroleum Base Hydraulic Fluid, 1 Qt
      11091768

      ROYCO 756 is a red-dyed, mineral oil based hydraulic fluid developed for the demands of aerospace and industrial service. ROYCO 756 contains additives that provide oustanding low temperature fluidity as well as exceptional anti-wear, oxidation/corrosion inhibition and shear stability. This high viscosity index fluid contains metal deactivators and foam inhibitors to enhance performance in various general purpose hydraulic applications.

       

       

      Features:

       

      • Wide operating temperature range
      • Low temperature fluidity
      • Exceptional anti-wear performance
      • "Super clean" fluid to improve equipment life
      • Excellent oxidation and corrosion inhibition

       

       

      Approvals:

       

      • U.S. Military Specification: MIL-H-5606A
      • U.S. Military Specification: MIL-H-5606G
      $8.09
    • https://shop.jeppesen.com/images///products/11091772-173x173.jpg
      Royco® 756 Red Mil-Prf-5606 Petroleum-Based Hydraulic Fluid, 1 Gallon
      11091772

      "Red oil" is a super clean, highly refined mineral oil based, hydraulic fluid for aoperation over wide temperature ranges.

      $34.24
    • https://shop.jeppesen.com/images///products/11091775-173x173.jpg
      Cleaner: 128P,1Gl,
      11091775
      Brillianize is a unique product that makes shiny surfaces brilliant. Shines metal surfaces, Plexiglass windows, Lexan, chrome, mirrors. Helps minimize fingerprints. Anti-static properties help repel dust.
      $18.25
    • https://shop.jeppesen.com/images///products/11091776-173x173.jpg
      Flamemaster Cs-3204 Class B-2 Ams-S-8802 Rev. D Type 2 Integral Fuel Tank Sealant, 1 Pt Can Kit
      11091776

      Flamemaster CS-3204 Chemseal Integral Fuel Tank Sealant is designed to withstand the attack of sulfur compounds present in jet fuels and is also used as a pressurized cabin sealant. Alternates with PR-1440, PS1440, PS-890, and MC-236.Type II, Class A 1/2 Sealant.

       

      Specifications:

      AMS-S-8802 formerly Mil-S-8802F Type II

      $26.91
    • https://shop.jeppesen.com/images///products/11091781-173x173.jpg
      Flamemaster Cs 3204 Aircraft Integral Fuel Tank Sealant Cartridge Kit, 3.5 Oz
      11091781

      CS 3204 is fuel resistant sealant for use on integral fuel tanks and pressurized cabins as well as other ares subject to contact with aircraft fuels, lubricants, oils, water and/or weathering.

       

      CS 3204 is a two-part polysulfide base compound that cures at room temperature to a flexible, resilient rubber with excellent adhesion to aluminum, magnesium, titanium, steel and various other materials. It is designed to withstand the attack of sulfur compounds that are present in jet fuels. When mixed CS 3204 Class A is self-leveling liquid. CS 3204 Class B is a thixotropic paste that will not flow or sag on vertical or overhead surfaces.

       

      Specifications:

      Class A contains toluene within the limits called out by AMS-S-8802

      $15.28
    • https://shop.jeppesen.com/images///products/11091798-173x173.jpg
      Mobil Aviation Grease Shc 100, 4.4 Lb Can
      11091798

      Aviation Grease SHC 100 grease offers outstanding protection for aircraft wheel bearing applications and meets the specifications of ABSC, Dunlop, Goodrich, Honeywell, Messier-Bugatti and Parker-Cleveland.


      • High viscosity index (VI) base stock with no wax content
      • Outstanding high temperature and low temperature performance
      • Excellent protection against wear, rust, and corrosion
      • Wide application temperature ranges, with excellent protection at high temperatures and low torque, easy start-up at low temperatures
      • Thicker fluid films protecting against wear of equipment parts operating at high temperature
      • Reduced downtime and maintenance costs because of reduced replacement of equipment parts

      Applications:


      Mobil Aviation Grease SHC 100 is recommended for aviation applications which need a lubricant that can perform normal functions, yet go far

      $89.46
    • https://shop.jeppesen.com/images///products/11091808-173x173.jpg
      Dow Corning® Sealant Gray, 3 Oz
      11091808

      Dow Corning® RTV3145 Series silicone sealant has a specific gravity of 1.1. This slight odored, paste sealant is gray in color and comes in a 3-ounce container. The silicone base product has a tensile strength of 864 psi and withstands a temperature of -45 to 200 degrees C.


      Features:

      • Requires no mixing and no ovens
      • Ensures quick in-line processing with optional heat acceleration
      • Can be considered for use with military specification and standard requirements
      • Relative density of 1.12

      Benefits:

      • Cures at room temperature
      • Non-flowing sealant offers high tensile/tear strength and elongation

      Applications:

      • Sealing openings in modules and housings
      • Assembly of components on printed wiring board (PWB)
      • Sealing in and around wired and electrical leads

      Specifications

      $34.06
    • https://shop.jeppesen.com/images///products/11091809-173x173.jpg
      Dow Corning® Xiameter® Sealant 2423472 Red, 90 Ml Tube
      11091809

      Dow Corning® Xiameter® RTV736 Series heat-resistant silicone sealant is red in color and has a specific gravity of 1.04. An acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 348.1 psi and requires 24 hours for curing. This product withstands a temperature of -65 to 260 degrees C.


      Features:

      • Ensures stability at high temperatures
      • Non-sag or non-flowing
      • Relative density of 1.04

      Benefits:

      • Can be applied overhead or on side walls
      • Used in applications with continuous exposure to 260 degrees C and intermittent exposure to 315 degrees C

      Applications:

      • Sealing and encapsulating heating elements in appliances
      • Aerospace gasketing
      • Moving oven belts, industrial ovens
      • Bag filters on smoke stacks
      • Other critical bonding, sealing, pott
      $9.16
    • https://shop.jeppesen.com/images///products/11091818-173x173.jpg
      Lycoming LW-16702 Engine Oil Additive Kir, 6 OZ
      11091818
      Lycoming Engines is a major American manufacturer of aircraft engines. Lycoming produces a line of horizontally opposed, air-cooled, four-, six- and eight-cylinder engines including the only FAA-certified aerobatic and helicopter piston engines on the market.
      $44.41
    • https://shop.jeppesen.com/images///products/11091825-173x173.jpg
      Mobilgrease 28 Synthetic Aircraft Grease Red, 4.4 Lb Can
      11091825

      Designed for plain and rolling bearings, splines, screws, worm gears and other mechanisms where high-friction reduction, low-wear and low-lubricant friction losses are required. Meets the specifications of MIL-PRF-81322G; DOD-G-24508A, Amendment 4; and NATO G-395.


      • High viscosity index (VI) synthetic base stock with no wax content
      • Excellent protection against wear and corrosion
      • Extreme-pressure protection characteristics
      • Allows wide operating temperature range - outstanding high and low temperature performance
      • Provides thicker fluid films protecting against wear of equipment parts operating at high temperature
      • Superb bearing protection and helps extend bearing life and reduce bearing replacement costs

      Applications:


      Mobilgrease 28 is designed for the lubrication of plain and rolling bearings at low to high speeds, and splines, screws, worm

      $73.09