Aircraft Supplies

    369 Products found for Aircraft Supplies
    • https://shop.jeppesen.com/images///products/11091355-173x173.jpg
      Polish: Novus,#3,8Oz,
      11091355
      Novus #1 gently cleans without scratching. #2 removes fine scratches, and #3 removes heavier scratches.
      $8.64
    • https://shop.jeppesen.com/images///products/11091361-173x173.jpg
      Ppg Prc-Desoto® Fuel Tank Sealant Pr1440B1-2, 6 Oz Cartridge
      11091361

      PPG PRC-Desoto Series two-part class B fuel tank sealant is a two-component formulation such as part-A and part-B. Part-A of sealant comes in a liquid form and is black in color. Part-B of sealant comes in solid form and is beige in color. It has a specific gravity of 1.56. Boiling point of part-A sealant is 360 degrees C. Part-B of sealant has a VOC content of 16 grams per liter for quick dry. The part-A has a density of 15.69 pounds per gallon while part-B has 13.1 pounds per gallon. Kinematic viscosity of part-A is greater than 0.21 square centimeters per second at 40 degrees C. It has a service temperature range of -54 to 121 degrees C. The product comes in a 6-ounce cartridge.


      Features:

      • Efficiently cures at room temperature to form a resilient sealant
      • Application time of 1/2 hour and requires 8 hours for complete curing
      • Mixing ratio of part-A/B is 10:100 by weight
      • Withs
      $35.74
    • https://shop.jeppesen.com/images///products/11091362-173x173.jpg
      Dow Corning® Xiameter® Sealant White, 90 Ml Tube
      11091362

      Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is white in color and has a specific gravity of 1.04 at 25 degrees C. This acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.


      Features:

      • Exhibits excellent dielectric properties
      • Sealant cures completely at room temperature, just by exposing to moisture in the air
      • Ensures stability at both high and low temperatures
      • Robotically dispensable and non-slump
      • Allows quick and easy processing
      • One-component adhesive/sealant with acetoxy cure system
      • Easy to apply non-sag, paste consistency
      • Relative density of 1.04

      Benefits:

      • Good adhesion to many substrates
      • Vibration absorption/sound dam
      $3.81
    • https://shop.jeppesen.com/images///products/11091371-173x173.jpg
      Royco® 43 Lithium Grease, 6.5 Lb
      11091371

      Royco 43 is a lithium-based grease system used for specific heterogenous materials applications.

       

      Specifications:
      SAE-AMS-4343
      NATO: G-392

      $189.90
    • https://shop.jeppesen.com/images///products/11091373-173x173.jpg
      $5.45
    • https://shop.jeppesen.com/images///products/11091378-173x173.jpg
      Flamemaster Sealant: A/B,Gry,Qt,
      11091378
      Integral Fuel Tank Sealant - Meets AMS-S-8802, Type II, Class B 1/2 Sealant. Designed to withstand the attck of sulfur compounds present in jet fuels. Also used as a pressurized cabin sealant. Alternates with PR-1440, PS1440, PS-890, and MC-236.Type II, Class A 1/2 Sealant.
      $46.36
    • https://shop.jeppesen.com/images///products/11091380-173x173.jpg
      Mobilgrease 33 High-Performance Aircraft Lubricant, 13.4 Oz Tube
      11091380

      Mobilgrease33 is a high-performance lithium-complex grease designed for multi-purpose airframe use. Meets the specifications of Airbus AIMS09-06-002; Boeing BMS 3-33B Type 1; MIL-PRF-23827C, Amendment 2, Type I; NATO G-354; and SAE AMS3052.


      • High viscosity index polyalphaolefin basestock
      • Good storage stability
      • Exceptional resistance to thermal and oxidative degradation
      • Very wide operating temperature range with outstanding high and low temperature performance and excellent lubricant film protection at high temperatures
      • Grease structure integrity maintained - low oil separation
      • Long grease and lubricated part service life

      Applications:


      Mobilgrease 33 is a true multipurpose aviation grease intended for use in highly loaded anti-friction bearings, gears, and actuators as well as instruments, high speed bearings (though not recommended for wh

      $14.32
    • https://shop.jeppesen.com/images///products/11091393-173x173.jpg
      $37.58
    • https://shop.jeppesen.com/images///products/11091407-173x173.jpg
      Royco® 586M Lubricating Oil, 5 Gal
      11091407

      A blend of highly refined mineral oils and additives that achieve excellent load carrying capacity and corrosion/oxidation inhibition. A higher viscosity and load carrying capacity than Royco 586L Lubricating Oil. Designed for application in gear boxes and specified helicopter transmissions.

       

      Specifications:
      MIL - PRF - 6086 GRADE M
      NATO: MIL - PRF - 6086 GRADE M

       

      Joint Service Designation: OEP-70

      $177.80
    • https://shop.jeppesen.com/images///products/11091417-173x173.jpg
      Mobilgrease 28 Synthetic Aircraft Grease Red, 35.2 Lb Pail
      11091417

      Designed for plain and rolling bearings, splines, screws, worm gears and other mechanisms where high-friction reduction, low-wear and low-lubricant friction losses are required. Meets the specifications of MIL-PRF-81322G; DOD-G-24508A, Amendment 4; and NATO G-395.


      • High viscosity index (VI) synthetic base stock with no wax content
      • Excellent protection against wear and corrosion
      • Extreme-pressure protection characteristics
      • Allows wide operating temperature range - outstanding high and low temperature performance
      • Provides thicker fluid films protecting against wear of equipment parts operating at high temperature
      • Superb bearing protection and helps extend bearing life and reduce bearing replacement costs

      Applications:


      Mobilgrease 28 is designed for the lubrication of plain and rolling bearings at low to high speeds, and splines, screws, worm

      $552.06
    • https://shop.jeppesen.com/images///products/11091420-173x173.jpg
      3M Aerospace Sealant AC-350 B-2, Pint Kit
      11091420
      3M™ Surface Pre-Treatment AC-130-2 as a high-performance, water-based solution gelation (sol-gel) system to improve adhesive bonding of metal and composite surfaces. Our high-performance, non-chromated pre-treatment is ideal for aluminum alloys, steel, titanium and composites.
      $47.19
    • https://shop.jeppesen.com/images///products/11091422-173x173.jpg
      Brayco 599 Dark Amber Preservation Oil, 8 Oz
      11091422

      Brayco 599 is designed for use as an additive for turbine engines and helicopter transmissions that use MIL-PRF-23699F lubricating oil. Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be placed in storage, especially in locations where high humidity and salt spray are present. The corrosion inhibited oil should be capable of limited use not to exeed 25 hours. Please consult the engine manufacturer's manual to determine specific engine model recommendations and/or limitations.

       

      To receive full protection for extended equipment storage, Castrol recommends addition of Brayco 599 in concentrations between 10% and 15% by volume. Lower concentrations between 5% and 10% may be suitable for some component storage applications depending upon storage conditions and length of storage. Please consult the engine manufacturer's maintenance manual or service bulletin t

      $28.27
    • https://shop.jeppesen.com/images///products/11091425-173x173.jpg
      Lubricant: Solid,Push Tube,1.6Oz, Boelube
      11091425
      High Efficiency Lubrication High lubricity and unique polar properties are the keys to its ability to provide superior metalworking lubrication. The application of minute amounts of BOELUBE, which is consumed in the metalworking process, will greatly improve tool life, surface finish and hole quality. BOELUBE provides superior lubricity when machining materials such as aluminum and titanium where high quality finish and an increase in tool life is observed. Cost savings are derived through longer tool life, increased productivity, reduced lubricant usage, lower shop maintenance costs, and clean chips, parts and machinery. Advantages BOELUBE will not promote dermatitis and presents a safe effective method for operators to machine various types of metal, composites, graphite, etc. without special handling or typical disposal problems. BOELUBE is easily removed with water-based cleaner, isopropyl alcohol or denatured alcohol. In most cases
      $4.01
    • https://shop.jeppesen.com/images///products/11091452-173x173.jpg
      3M Scotch-Weld Rubber and Gasket Adhesive EC-847
      11091452
      A premium quality, reddish brown, multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Has exceptional resistance to most fuels and oil.
      $53.38
    • https://shop.jeppesen.com/images///products/11091454-173x173.jpg
      Henkel Loctite® Letter Grade C (084) Threadlocker 195776 Blue, 50 mL bottle
      11091454

      Henkel Loctite® Letter Grade C (084) Medium Strength Threadlocker is used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools. Meets Mil-S-22473E and ASTM D5363.

      Manufacturer P/N: 195776 

      $61.06
    • https://shop.jeppesen.com/images///products/11091457-173x173.jpg
      Henkel Loctite® 242 Threadlocker Sealant 24231 Blue, 50 Ml Bottle
      11091457

      Henkel Loctite 242 Series medium strength threadlocker sealant is suitable for use on fasteners up to 3/4 inch diameter. This sealant has a vapor pressure less than 5 millimeters Hg at 27 degrees C, specific gravity of 1.1 at 23.9 degrees C, VOC contents of 0.56%, 6.17 grams per liter and a boiling temperature rating greater than 149 degrees C. It has a flash point greater than 93.3 degrees C TCC for safe use. The mild odored, liquid sealant is blue in color and comes in a 50-milliliter bottle. It has a tensile strength of 110 psi and withstands a temperature range of -65 to 300 degrees F. This product requires 24 hours for curing at 25 degrees C, 10 minutes for drying and 5 minutes for setting.


      Features:

      • Thixotropic to reduce sealant migration
      • Flammability limit of 2.6% LEL and 12.5% UEL
      • Viscosity of 1200 to 5000 centipoises at 25 degrees C
      • Torque rating of 110 pounds-inch
      $40.64
    • https://shop.jeppesen.com/images///products/11091464-173x173.jpg
      Lanxess Solutions Oil: Turbine Engine,Qt, Royco 808,Mil-Prf7808H
      11091464

      ROYCO 808 is a synthetic based lubricating oil for gas turbine engines requiring an oil with lower volatility and higher oxidative stability than is obtainable with conventional mineral based turbine oils. ROYCO 808 is formulated using the highest quality polyol ester base stocks compounded with additives to impart higher oxidation and corrosion resistance as well is enhanced antiwear protection. These benefits provide for exceptionally clean engine operation as well as extended drain intervals.


      ROYCO 808 meets all requirements and is qualified under MIL-SPEC: MIL-PRF-7808L Grade 3.

      Royco 808 is not interchangeable with any other lubricating oils except those qualified under MIL-PRF-7808 or MIL-L-23699.

      $14.25
    • https://shop.jeppesen.com/images///products/11091473-173x173.jpg
      Momentive™ Sealant Rtv108 Translucent, 2.8 Oz Tube
      11091473

      Momentive™ RTV108 general-purpose silicone sealant is a one-component sealant that has a specific gravity of 1.05 and requires 3 days for full curing to form durable, resilient silicone rubber on exposure at room temperature and ambient humidity. This ready-to-use self-adhesive sealant has 26 grams per liter VOC contents that evaporate slowly without leaving any residues or stains. This acetic acid odored sealant has a flash point greater than 93.3 degrees C and works at a temperature of 204 degrees C. This paste sealant is translucent in color and comes in a 2.8-ounce tube.

       

      Features:

       

      • Standard strength sealant offers high-temperature paste consistency
      • Excellent resistance to chemical, ozone and various weather conditions
      • Ensures low-temperature flexibility while offering high-temperature performance
      • Density of 1.06 grams per cubic centimeter
      $7.06
    • https://shop.jeppesen.com/images///products/11091474-173x173.jpg
      Dow Corning® Xiameter® Encapsulant 4107668 Off-White, 453 G Jar
      11091474

      Dow Corning® Xiameter® RTV-3112 Series general-purpose encapsulant has a flash point greater than 100 degrees C for safe use. The silicone rubber-based product has a specific gravity of 1.30 and a boiling point temperature rating of 90 degrees C. This slight odored, liquid encapsulant is off-white in color and comes in a 453-gram jar. It withstands a tensile strength of 640 psi. This product requires 24 hours for curing and withstands a temperature of -55 to 250 degrees C.


      Features:

      • Viscosity of 280 poise
      • Relative density of 1.48

      Benefits:

      • Low mixed viscosity and adjustable cure times

      Applications:

      • Electronic potting and encapsulating applications

      Specifications:

      OSHA (29 CFR 1910.1048) Certified

      $32.77
    • https://shop.jeppesen.com/images///products/11091480-173x173.jpg
      3M™ Scotch-Weld™ 2216 B/A Adhesive 62350805305, 2 fl oz kit
      11091480
      3M™ Scotch-Weld™ 2216 B/A Series structural epoxy adhesive is a two-part room temperature curable epoxy offering high peel and shear strength.
      $55.46