Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is clear in color and has a specific gravity of 1.04. This acetic acid odored, paste sealant comes in a 300-milliliter cartridge. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.

Features:

• Exhibits excellent dielectric properties
• Acetoxy cure system
• Easy to apply non-sag, paste consistency

Benefits:

• Excellent adhesion to many substrates
• Cures at room temperature when exposed to moisture for a tough, flexible rubber

Applications:

• General industrial sealing and bonding applications
• Sealing flashing, vents, flues, gutters, marine cabins and windows
• Electrical boxes
• Caulking joints in sheet metal stacks
• Duc

PR-1422 Class B is an aircraft integral fuel tank sealant. It has a service range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing fuel tanks and other aircraft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.

 

PR-1422 Class B is a two-part, dichromate cured poly-sulfide compound. The uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form resilient sealant having excellent adhesion to common aircraft substrates.

 

Specifications:

• AIMS 04-05-001 - H – AIRBUS
• AIMS 04-05-002 - H – AIRBUS
• AMS-S-8802 - Type 1 Class B-1/2
• CMS-SL-1

Henkel Loctite 271 Series anaerobic threadlocker sealant is suitable for permanent locking and sealing of threaded fasteners. This dimethacrylate ester-based sealant has a vapor pressure less than 5 millimeters Hg at 26.7 degrees C, specific gravity of 1.1 at 25 degrees C, VOC contents of 7.81 grams per liter and a boiling temperature rating greater than 148.9 degrees C. It has a flash point greater than 93.3 degrees C TCC for safe use. The mild odored, liquid sealant is red in color and comes in a 10-milliliter bottle. It has a tensile strength of 250 psi. This product requires 24 hours for curing at 25 degrees C, 10 minutes for drying and 10 minutes for setting. It withstands a temperature range of -65 to 300 degrees F.

Features:

• Avoids loosening from shock and vibration
• Viscosity of 500 centipoises at 25 degrees C
• Torque rating of 250 pounds-inch break and 275 pounds-inch prevail

3M™ Scotch-Weld™ EC-1300L rubber and gasket adhesive is yellow in color and dries quickly within 10 to 20 minutes of open time. This adhesive uses sprayer, brush or roller as the applicator to meet the specific demands of the job. It offers heat resistance up to 300 degrees F. The sweet odored, liquid adhesive has a boiling point of 60 degrees C, flash point of -25.6 degrees C and a viscosity of +/- 675 megapascals. It has less than or equal to 662 grams per milliliter VOC contents that ensure fast evaporation. This polychloroprene-based adhesive comes in a 1-quart can.

ARALDITE2014AB, DUAL BARREL CT

Dow Corning® Xiameter® RTV736 Series heat-resistant silicone sealant is red in color and has a specific gravity of 1.04. An acetic acid odored, paste sealant comes in a 300-milliliter cartridge. It has a tensile strength of 348.1 psi and requires 24 hours for curing. This product withstands a temperature of -65 to 260 degrees C.

Features:

• Ensures stability at high temperatures
• Non-sag or non-flowing
• Relative density of 1.04

Benefits:

• Can be applied overhead or on side walls
• Used in applications with continuous exposure to 260 degrees C and intermittent exposure to 315 degrees C

Applications:

• Sealing and encapsulating heating elements in appliances
• Aerospace gasketing
• Moving oven belts, industrial ovens
• Bag filters on smoke stacks
• Other critical bonding, sealing

PPG PRC-Desoto Series two-part class B fuel tank sealant is a two-component formulation such as part-A and part-B. Part-A of sealant comes in a liquid form and is black in color. Part-B of sealant comes in solid form and is beige in color. It has a specific gravity of 1.56. Boiling point of part-A sealant is 360 degrees C. Part-B of sealant has a VOC content of 16 grams per liter for quick dry. The part-A has a density of 15.69 pounds per gallon while part-B has 13.1 pounds per gallon. Kinematic viscosity of part-A is greater than 0.21 square centimeters per second at 40 degrees C. It has a service temperature range of -54 to 121 degrees C. The product comes in a 6-ounce cartridge.

Features:

• Efficiently cures at room temperature to form a resilient sealant
• Application time of 1/2 hour and requires 8 hours for complete curing
• Mixing ratio of part-A/B is 10:100 by weight
• Withs

Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is white in color and has a specific gravity of 1.04 at 25 degrees C. This acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.

Features:

• Exhibits excellent dielectric properties
• Sealant cures completely at room temperature, just by exposing to moisture in the air
• Ensures stability at both high and low temperatures
• Robotically dispensable and non-slump
• Allows quick and easy processing
• One-component adhesive/sealant with acetoxy cure system
• Easy to apply non-sag, paste consistency
• Relative density of 1.04

Benefits:

• Good adhesion to many substrates
• Vibration absorption/sound dam

Integral Fuel Tank Sealant - Meets AMS-S-8802, Type II, Class B 1/2 Sealant. Designed to withstand the attck of sulfur compounds present in jet fuels. Also used as a pressurized cabin sealant. Alternates with PR-1440, PS1440, PS-890, and MC-236.Type II, Class A 1/2 Sealant.

3M™ Surface Pre-Treatment AC-130-2 as a high-performance, water-based solution gelation (sol-gel) system to improve adhesive bonding of metal and composite surfaces. Our high-performance, non-chromated pre-treatment is ideal for aluminum alloys, steel, titanium and composites.

A premium quality, reddish brown, multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Has exceptional resistance to most fuels and oil.

Henkel Loctite® Letter Grade C (084) Medium Strength Threadlocker is used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools. Meets Mil-S-22473E and ASTM D5363.

Manufacturer P/N: 195776 

Henkel Loctite 242 Series medium strength threadlocker sealant is suitable for use on fasteners up to 3/4 inch diameter. This sealant has a vapor pressure less than 5 millimeters Hg at 27 degrees C, specific gravity of 1.1 at 23.9 degrees C, VOC contents of 0.56%, 6.17 grams per liter and a boiling temperature rating greater than 149 degrees C. It has a flash point greater than 93.3 degrees C TCC for safe use. The mild odored, liquid sealant is blue in color and comes in a 50-milliliter bottle. It has a tensile strength of 110 psi and withstands a temperature range of -65 to 300 degrees F. This product requires 24 hours for curing at 25 degrees C, 10 minutes for drying and 5 minutes for setting.

Features:

• Thixotropic to reduce sealant migration
• Flammability limit of 2.6% LEL and 12.5% UEL
• Viscosity of 1200 to 5000 centipoises at 25 degrees C
• Torque rating of 110 pounds-inch

Momentive™ RTV108 general-purpose silicone sealant is a one-component sealant that has a specific gravity of 1.05 and requires 3 days for full curing to form durable, resilient silicone rubber on exposure at room temperature and ambient humidity. This ready-to-use self-adhesive sealant has 26 grams per liter VOC contents that evaporate slowly without leaving any residues or stains. This acetic acid odored sealant has a flash point greater than 93.3 degrees C and works at a temperature of 204 degrees C. This paste sealant is translucent in color and comes in a 2.8-ounce tube.

 

Features:

 

• Standard strength sealant offers high-temperature paste consistency
• Excellent resistance to chemical, ozone and various weather conditions
• Ensures low-temperature flexibility while offering high-temperature performance
• Density of 1.06 grams per cubic centimeter

Dow Corning® Xiameter® RTV-3112 Series general-purpose encapsulant has a flash point greater than 100 degrees C for safe use. The silicone rubber-based product has a specific gravity of 1.30 and a boiling point temperature rating of 90 degrees C. This slight odored, liquid encapsulant is off-white in color and comes in a 453-gram jar. It withstands a tensile strength of 640 psi. This product requires 24 hours for curing and withstands a temperature of -55 to 250 degrees C.

Features:

• Viscosity of 280 poise
• Relative density of 1.48

Benefits:

• Low mixed viscosity and adjustable cure times

Applications:

• Electronic potting and encapsulating applications

Specifications:

OSHA (29 CFR 1910.1048) Certified

3M™ Scotch-Weld™ 2216 B/A Series structural epoxy adhesive is a two-part room temperature curable epoxy offering high peel and shear strength.

3M AC350B Aerospace Sealant meets both AMS-S8802 Type II and AMS3276. It can also be certified to CMNP093 Type XIV or MMS332 Grade 2 on a special order basis.

Integral Fuel Tank Sealant - Meets AMS-S-8802, Type II, Class B 1/2 Sealant. Designed to withstand the attck of sulfur compounds present in jet fuels. Also used as a pressurized cabin sealant. Alternates with PR-1440, PS1440, PS-890, and MC-236.Type II, Class A 1/2 Sealant. Note that this is sold in a 1/2 pint can, not a Semkit.